sales@haisicbattery.com
+86-13430797121
Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
With easy installation and a minimalist design, the Movable module lithium battery complements a variety of home styles. The battery capacity can be increased freely and flexibly according to the situation of home use. Use the best safety LiFePO4 battery to save costs. Easy installation, according to the power storage, needs, and combining different batteries pack.
What are the common categories of energy storage systems?
There are several types of common energy storage batteries on the market:
All-in-one ESS (build-in inverter)
Stacked
Wall-mounted
On-wheels
Rack-mounted
Battery parameters
How do I install my energy storage system?
If you are a certified installer such as an electrician installation, you can install energy storage batteries for your home by yourself. Before installation, please confirm that the received product is well packaged and undamaged, and keep the corresponding warranty certificate.
If you are not a professional solar installer, please contact local installers and installers to operate. Please check the relevant credentials of the installer before installation, which indicates that the installer is qualified to install your battery storage system.
The installer may shut down the house sometime during the installation, but this period should be brief. If your meter or meter box needs an upgrade, your power may need to be off for a longer period. During the entire installation period, please confirm receipt of all necessary documents and save them. This is the most important document if you need to make a warranty or claim.
Note that it is also very important to learn how to properly use the energy storage battery from the installer before they leave.
Inverter parameters
| Model | R10KL1 |
| Input (PV) | |
| Max. power(kW) | 13 |
| Max. DC voltage(V) | 500 |
| MPPT voltage range(V) | 120~500 |
| Max.input current of single MPPT(A) | 12 |
| MAX. short circuit current(A) | 15 |
| AC output | |
| Rated output power(kVA) | 10 |
| Max. output power(kVA) | 11 |
| Max. output current(A) | 47.8 |
| Ac output voltage(V) | 220,230,240 |
| Frequency (Hz) | 50/60（45 ~ 55, 55 ~ 65） |
| PF | 0.8lagging-0.8leading |
| THDi | < 2% |
| Battery | |
| Nominal voltage (V) | 48 |
| Battery voltage range(V) | 40~60 |
| Max. charge/discharge current(A) | 210/210 |
| Battery type | lithium /Lead-acid |
| Charging strategy for Li-Ion battery | Self-adaption to BMS |
| EPS output | |
| Rated power (kVA) | 10 |
| Rated output voltage(V) | 220, 230 ,240 |
| Rated frequency (Hz) | 50/60 |
| THDu | < 2% |
| Protection | |
| Grounding detection | YES |
| Arc fault protection | optional |
| Island protection | YES |
| Battery reverse polarity | YES |
| Insulation resistor detection | YES |
| Residual current monitoring unit | YES |
| Output over current protection | YES |
| Back-up output short protection | YES |
| Terminal temperature detection | YES |
| Output over voltage/under voltage protection | YES |
| General data | |
| Europe efficiency (PV) | ≥97.8% |
| MAX. battery to load efficiency | ≥97.2% |
| Ingress protection | IP65 |
| Noise emission(dB) | <38 |
| Operation temperature | -25℃ ~ 60℃ |
| Cooling | FAN Cooling |
| Relative humidity | 0 ~95%（non-condensing） |
| Altitude | 2,000m (>2,000 Derating) |
| Dimensions W *D *H (mm) | 430*220*710 |
| Weight(kg) | 41 |
| Display | LCD，Touch panel（optinal） |
| Communication with BMS/meter/EMS | RS485，CAN |
| Communication interface | RS485, WLAN, 4G (optional) |
| Self-consumption at night | < 2.5 W (with battery enabling < 5 W) |
| Certificates | South Africa NRS, IEC 62109-1/-2, IEC 61000-6-1, IEC 61000-6-3 |
What should I pay attention to when using the energy storage battery?
If you want to extend the service life of the energy storage battery, regularly conduct a full discharge cycle for the battery.
Place the battery at about 25 ℃ for charging and discharging. Keep away from fire sources and high temperatures to avoid fire and explosion. When the battery is not in use, it should be stored in a place with low humidity and good ventilation.
Since the self-discharge rate of the inner LFP battery of the energy storage battery is about 3% per month, please ensure that there is no load during storage and remember to charge the battery regularly.
If the battery emits a peculiar smell, heating, discoloration, deformation, or any abnormality during use, storage or charging, please stop it immediately and contact a professional for equipment inspection.
Do not add, remove or damage the battery equipment by yourself.
